Scuba Diver’s 15-Piece Garage Kit

Operate these popular utility tools off your scuba tank and regulator! No air compressor required!

    Inflate your car and bike tires

    Inflate your soccer ball

    Blow off your workbench

    Blow up balloons

Expand your kit with additional pneumatic tools and the possibilities are limitless!

    Operate nail guns

    Paint your fence with a paint sprayer

    Grind rust off metal

    Spackle your walls

The coiled air hose has been adapted to fit the LP port of a scuba diver’s regulator.

This kit includes: Blow Gun, Ball Foot Chuck, Tire Gauge, Male I/M Plugs (x2), Female I/M Plug, Male Coupling, Female Coupling, Safety Nozzle, Tapered Inflator Tip, Inflation Needles (x2), Rubber Blow Gun Tip, 25 ft (7.62 m) Nylon Recoil Hose, and Universal Coupler.

The Female I/M Plug, Male Coupling, and Female Coupling are extra to allow for expansion of your kit. Match with other tools and accessories of the same style and size.

Specs:

    Size: ¼” NPT male and female threads

    Style: I/M Industrial

I/M is interchangeable with:

    Campbell Hausfeld - I/M styles

    Milton - M styles

    Amflo - Type D

    Camel - Type D

    Truflate - I/M Styles

WARNINGS:

    This product is designed for use on a low-pressure port of properly functioning scuba regulator. The ideal pressure is 90-140 PSI (6-9.7 BAR). DO NOT EXCEED 150 PSI (10 BAR).

    Your regulator’s first stage must be equipped with an over-pressure (O/P) relief valve. In the event of a first stage malfunction, the O/P valve will engage, preventing dangerous hose rupture. If you have a second stage attached to the regulator’s first stage, it will act as an O/P valve. If you do not have the regulator’s second stage attached, then you will need to install an O/P Valve (p/n AC395 or AC396).

Eye and hearing protection required